齐发国际APP



唐林传授









学科范畴(Major field

机器设计及实际学科传授。

Modern design theory of mechanical systems

学术兼职(Professional Activities)

1、中国机器工程学会 机器设计分会委员;

3、上海市机构学及创新设计委员会委员;

3、上海市机器工程学会会员;

4、上海市古代设计法研讨会会员。

Since 2008

Committee member, China Society ofMechanical Design

Since 2005

Reviewer, National Science Foundation of China

Since 2004

  • Cpmmittee member, Shanghai Committee of Mechanism and Innovative Design

  • Member, Shanghai Society of Mechanical Engineering

  • Member, Shanghai Seminar of Modern Design Methodology


负担课程Courses Taught

1、金属切削机床概论(本科)

2、金属切削机床设计(本科)

3、周详机器零件设计(本科)

4、机器设计根底(本科)

5、机器原理(本科)

6、产物观点设计(本科、硕士)

7、产物设计实际与方式(博士)


      • Fundamentals of machine tooling

      • Machining and its tool design

      • Design of precision mechanical elements

      • Fundaments of machine design

      • Theory of mechanisms and machines

      • Conceptual design of products

      • Theory and methodology of products

研讨偏向(Fields of Research

  • 盘算机辅佐机构/机器零碎观点设计---实际、方式及东西

  • 产物观点设计实际及方式

  • 集成设计实际及方式

  • Theory, methodology and tool for Computer-aided conceptual design of mechanical systems

  • Theory and methodology for conceptual design of products

  • Theory and methodology for integrated design

声誉及获奖情形(Awards)

  • 著作《产物观点设计根本原理及方式》获上海汽车产业教诲基金会优异著作三等奖

  • 《机器设计根底》讲授课件获教诲部构造的天下第五届多媒体课件大赛三等奖

  • 云南省初等院校青年西席讲堂讲授竞赛三等奖

  • 昆明理工大学青年西席讲堂讲授竞赛一等奖

  • Book “Principle and method for conceptual design of products”, a 3rd award, Shanghai Automotive Educational Foundation.

  • Courseware “fundamentals of mechanical design”, a 3rd award, Information centre for education management of the Education Ministry of P.R. China

  • Province-wide Teaching Evaluation for the higher education, a 3rd award, YunnanProvince

  • Teaching Evaluation, the 1st award, Kunming University of Technology

近几年负担的科研项目

1、主完成持《机器设计根底讲授形式与先生创新设计才能培育》(2006)

2、掌管完成《模切机递纸机构活动零碎观点设计》(2006)

3、掌管完成《模切机牙排移植设计》(2004)

4、掌管完成《机器活动零碎观点设计主动化模子》(2003)

5、加入完成《机器活动方案智能CAD设计实际及实在现》(国度天然迷信基金,2000)

著作及电子出书物(Books and electrical publications )

2010,唐林(参编)《机器原理》.北京:清华大学出书社,北京交通大学出书社,ISBN 978-7-81123-756-6

2010Tang, Lin. (Confederate author), Mechanical Theory, Tsinghua University Press, Beijing Jiaotong University Press Beijing, P.R. China,ISBN 978-7-81123-756-6,(in Chinese)

2010,唐林(参编)《趣谈无所不在的设计》.北京:迷信出书社

2010Tang, Lin. (Confederate author), Funny talk about the design in everywhere, Science Press, Beijing, P.R. China, 2010,

ISBN 978-7-03-028294-1,(in Chinese)

2008,唐林《机器设计根底》讲授课件.北京:清华大学出书社,ISBN 978-7-89474-123-3

2008Tang, Lin. Courseware for Fundamentals of machine design, Tsinghua University Press, Beijing, P.R. China,

ISBN 978-7-89474-123-3,(in Chinese)

2008,唐林《机器设计根底》.北京:清华大学出书社,ISBN 978-7-302-18596-3,

2008Tang, Lin.Fundamentals of machine design, Tsinghua University Press, Beijing, P.R. China,ISBN 978-7-302-18596-3,

(in Chinese)

2006,唐林.产物观点设计根本原理及方式.北京:国防产业出书社,ISBN 978-7-118-04494-6

2006Tang, Lin. Principle and method for conceptual design of products. National Education Press, Beijing, P.R. China,

ISBN 978-7-118-04494-6, (in Chinese)

博士及博士后研讨(Research of Ph. D and Postdoctoral

2000 Tang, Lin, Automated synthesis theory and realization for mechanism types. Ph.D. Dissertation (in Chinese), ShanghaiJiaotongUniversity, Shanghai, P. R. China

2002 Tang, Lin. Research on automated system for selection and combination of mechanisms based on set theory. Report of Postdoctoral Research Work (in Chinese), DonghuaUniversity, Shanghai, P. R. China

次要论文(Publications

2009刘钰,唐林,基于辅佐特性的立体杆系机构主动化妆配.机器设计与制造,(12):65-67

2009 Liu Y. and Tang, Lin., Automation assembly of planar linkage mechanism based on auxiliary feature. Machinery Design and Manufacture. (12): 65-67 (in Chinese)

Abstract The parametric design of planar linkage mechanism parts,and the automated identifying, positioning and assembling of their mating features are presented in this paper, based on the auxiliary datum features of CAD environment in Solidworks.

2009TangLinSun X-Q. Method and Realization of Computer-Aided Combination of Assur Groups in Conceptual Design of Planar Linkage Mechanisms,The ASME/IFToMM International Confrence on Reconfigurable Mechanisms and Robots, London,123-128,EI收录(20094612456081)

Abstract Combination of Assur groups is one of important methods in conceptual design of planar linkage mechanisms. Although there are not many researches in this arena, the authors attempt to address two fundamental problems associated with the combination of Assur groups: 1) description and reorganization of Assur groups and other kind of groups; 2) Combinationcompatibility among Assur groups. The paper also presents a couple of examples to demonstrate how to realize the design by using the methods described.

2008Tang Lin. An Approach to Function Identification in Automated Conceptual Design of Mechanism systems. Research in Engineering Design, 19: 151-159,SCI收录(IDS Number: 370NV),EI收录(20084711712775), (in English)

Abstract It has been a challenge in computer-aided conceptual design of mechanism systems as how to describe the kinematic requirements and the functions of a mechanism so that computers can easily recognize, and eventually make automatic selections and combinations among many different types of mechanisms (those combinations include mechanisms of single and multi-degree of-freedom, and connected in series, or paprallel, or overlap,or feedback). In this paper, a methodology is presented to describe the kinematic characteristics of mechanism systems and their associated requirements so that they can easily recognized by computers. A practical approach is to define 'a kinematic function' to represent the kinematic characterizations of a.mechanism. It reflects the input and output motion of a given system. This kinematic function can regularly and accurately be described using function units and trees (any function tree consists of more than one function units and is regularly expressed). Because of its uniqueness, the process of mechanism synthesis can be easily recognized by a computer. The methodology demonstrated in the paper has universality and has been successfully incorporated into a software, which has been proven to be an useful tool for the conceptual design of mechanism systems.

2008 Tang Lin. An approach to the selection of mechanism types in computer aided conceptual design. Journal of Mechanical Engineering Science - Part C, 222 (3), 423 ~ 433,SCI收录(IDS Number: 298PH),EI收录(20082111262558), (in English)

AbstractThe selection of mechanism type is one of the important aspects in conceptual design of machine products. The paper applies the set theory for representing the attribute items of kinematic function to reflect the kinematic state and the function quality to reflect overall performances of the function unit for some complex design task. It gives a set-theory-based mode for the selection of mechanism types, in which precise reasoning by computer is combined with fuzzy appraisement by human. By precise reasoning at first, the computer selects from mechanisms database those mechanisms that can meet the kinematic requirements of the function unit to be solved. And then the function qualities of the selected mechanisms are appraised by human approving, which is actually a process of fuzzy match. This approach avoided the difficulty that the computer cannot yet effectively process fuzzy information and is suitable for the selection of both single-degree-of-freedom (DOF) and many-DOF mechanisms. The selected mechanisms can thusmeet the requirements not only of the kinematic function, but also of the function quality. The approach presented in the current paper has been successfully applied to the software development of computer-aided conceptual design of mechanism systems.

2007唐林,张孟春.基于拆卸特性模块的假造主动拆卸方式研讨.机器设计与制造,(10):159 ~ 161

2007Tang, Lin. and Zhang M-Ch. Research on automatic assembly based on assembly feature modules . Machinery Design and Manufacture.,(10): 159-161, (in Chinese)

AbstractIn order to ascertain the assembly relationship between assembly features of the parts being assembled under the assembly environment, the paper presented a new way for virtual automatic assembly based on assembly features’ modularized. This method analyses the assembly features of the single part or sub assemblies and then saves the features as different function modules. Using inherited way to finish assembly action with assembly data module and assembly relationship module which can ensure the consistency of data of the assembly features during the design. Taking involute straight teeth gear for example to explain the practicability and superiority of this method .

2007唐林.机器设计根底课程讲授形式改造与先生创新才能培育.第二届机器类课程讲述论坛论文集,北京:初等教诲出书社

2007Tang, Lin.Reform of teaching mode and training of innovation ability of students. Higher Education Press, Beijing, P.R. China,(in Chinese)

AbstractCombining with teaching of “theory and elements of mechanisms and machine”, this paper introduces the reforms of the teaching mode and methods of appraising the ability of students, its effects for enhancing study interest and ability to use knowledge as well as for cultivating innovation ability and team spirit of students. Besides,the paper points out that currently courses system and teaching plans are not harmonious to train innovators and inventors.

2006 Tang Lin.Many-degree of freedoms mechanism combination in automated conceptual design of mechanism systems.Journal of Mechanical Engineering Science,,220(5):727 ~ 740,SCI收录(IDS Number: 073KP),EI:20063310069444,ISI:000239742000015

Abstract: This article presents the mechanism combination’s modes, fundamentals, reasoning rules, and realization methods in the automated conceptual design of mechanism systems. According to the combination form between two function units, with the aid of morphology matrix, applying a recursive mode of mechanism combination and the reasoning system based on set theory, the function units’ solutions in the form of combination mechanisms can conveniently be generated. The theory and method presented in this article can simplify the process of mechanism combination and the reasoning rules and are suitable for the combination between not only single-degree-of-freedom mechanisms, but also many-degree-of- freedom mechanisms. They have successfully been applied to the software development of automated conceptual design of mechanism systems.

2006 唐林,王希金.机构主动化选型中基于特性的轨迹辨认方式.工程设计学报,13(2) :70-73

2006Tang, Lin. and Wang X-J. Orbit identification method for automatic mechanism selection based on their characteristics . Journal of Engineering Design. 13(2):70-73,(in Chinese)

Abstract:In automated selection system based on orbit characteristics and dimension parameters of key orbit segments are momentous for selecting mechanisms. An orbit curve identification method based on characteristic is presented. By describing orbit curves with abundant forms with the basic orbits such asline, arc, cusp and “8” form, identification of orbit characteristics can be well solved and fundamental characteristic parameters of key orbit segments can be determined

2003唐林,孙少杰,基于FlashMX平台的四杆机构参数化活动仿真.上海市机器工程学会庆贺50周年暨第二届上海机器科技论坛文集,77-78,(集会宣读论文),上海市机器工程学会编辑出书

2003Tang, Lin. and Sun, S-J. Dynamic simulation of various types of four-bar linkages by using FlashMX . Proceedings of Conference of the Second Forum of Mechanical Science and Technology in Shanghai, China,77-78,(in Chinese)

Abstract This paper introduces an approach to parameterized dynamic simulation of various types of four-bar linkages based on the software FlashMX. Namely, the type of four-bar linkages can change automated along with length changes of each bar in four-bar linkages, and man can simultaneously see the motion of this type of four-bar links.

2002 唐林,王生泽,盘算机辨认的机构组合模子.中国机器工程,13 (24),2111-2115,EI收录(EI03117399213)

2002Tang, Lin. and Wang, S-Z.Study on automated combination of mechanisms and their model build-up. China Mechanical Engineering,13(24), 2111-2115,(in Chinese)

AbstractIn order to realize computer aided connection between mechanisms, researches on mode, compatibility and approach of connection between mechanisms are carried out in detail, and thereby, a model for connecting mechanisms was upbuilt. According to concrete requirements for a function unit whose mechanical solution will be obtained by connecting mechanisms, this model has two kind of modes that are for minimum granularity function unit and for non-minimum granularity function unit respectively. The modes can been programmed and have been successfully applied to exploitation of software for connecting modes can be programmed and have been successfully applied to exploitation of software for connecting mechanisms with this software, and this laid a good foundation for realization of intelligent CAD of mechanical kinematic scheme.

2001 Tang Lin, He,W., Zou, H-J,Das Prinzip automatisierter Kombination von Mechanismen und dessen Realisierung. (The principle for automated connection of mechanisms and its realization). Mechanism and Machine Theory, 36(8),SCI收录 (IDS Number: 470MA);EI收录(EIP01406668368)

Abstract The problem roomage for automated connection of mechanisms in intelligent CAD for mechanical kinematics scheme was divided into kinematics function request and function quality request in this paper. Through computer reasoning, two mechanisms that are compatible in connection and can satisfy the needs for kinematics characteristic after connection were acquired. Then, a decision whether

mechanisms are connected is made by man according to the information of their function qualities. Under the guidance of the thought, author explored principles and methods for automated connection of mechanisms, which can be identified by computer, and applied these research results to software development for automated synthesis of mechanisms. It was realized that two rigidity mechanisms were reconnected automated.

2001 唐林,邹慧君,盘算机辅佐机构选型的完成.中国机器工程,12(8),918-921

2001 Tang, Lin. and Zou, H.-J. Accomplishing CAD of Selecting Mechanisms. China Mechanical Engineering, 12(8), 918-921,(in Chinese)

Abstract Task requirements of automated selecting mechanisms were compartmentalized into motion function and function qualities. We described the motion function in standardization methods and represented function qualities in human language. In the process of automated selecting mechanisms, the solutions meeting requirements of motion function were captured by accurate ratiocination that were completed by a computer. These mechanisms and the appraisals about their function qualities were stored in knowledge base. Designer can select them according to function qualities of each mechanism and complete fuzzy ratiocination. The reasoning method for automated selecting mechanisms is so predigested, and automated selecting mechanisms become reality. The difficulty of CAD for mechanical kinematic scheme is solved and then CAD for mechanical kinematic scheme has a good base.

2001 Tang, Lin. and Wang, S.-Z., Research on Model of intelligent CAD System for Mechanical Kinematic Scheme. Mechanical Science and Technology, 20(5), 784-786,792 (in Chinese)

Abstract A design mode of intelligent CAD for mechanical kinematic scheme in which mankind cooperates with computer is put forward after analyzing the factors restricting its development, and an object-oriented intelligent CAD system design model in which each subject ( subsystem ) has its independent design mode and method was established according to design characteristics of different design layers in design process. It makes possible the expansion and realization of intelligent CAD system for mechanical kinematic scheme, and simplifies its design, maintenance and management of the CAD system program.

  • 唐林,王生泽,基于聚集实际的机构主动化选型零碎.机器工程学报, 37(8),23-28,EI收录 (EI02397107738)

2001 Tang, Lin. and Wang, S.-Z.,System for automated Selection of Mechanisms Based on Set Theory, Chinese Journal of Mechanical Engineering, 37(8), 23-28,(in Chinese)

Abstract Thesystem for automated selection of mechanisms is divided into problem space and solution space and a mode for automated selecting mechanisms is set up, which is based on set theory and a working means of that man cooperates with computer. From problem space to solution space, different mapping ways are used for kinematical characteristic and function quality. Namely computer selects the mechanisms satisfying kinematical function request by exactly inference. These mechanisms form a new solution space W'J. According to the function quality of the mechanisms in W'Jman selects the usable mechanisms tallying with the request of function quality and a optimum mechanism from W'J. Therefore, the difficult problem of standardized describing the request of selecting mechanisms and the information of a mechanism is solved. According to the advanced principle, the automated selection of mechanisms has good come true.

2000唐林,邹慧君,用设计单位法完成盘算机辅佐机器活动方案设计.盘算机辅佐设计与图形学学报,12(8),EI收录(EI00095340737);支出《中国经济手艺生长优异文集》

2000 Tang, Lin. and Zuo, H.-J. Accomplishing CAD of mechanical kinematic scheme by the Method of Design Uni. Journal of Computer Aided Design and Computer Graphics, 12(8), 614-617, (in Chinese)

Abstract“Design unit” consists of “function unit” which is found the mechanism solution and its sub-function units. Using the method of design unit can simplify complicated design of kinematic scheme, i.e. finding the mechanism solution for a single function unit in each design unit. On the basis of that, this paper establishes design model for kinematic scheme of machinery. The design model can be

ognized by a computer and solves a key problem of kinematic scheme designing by computer aiding. About description of function unit, a basic work which is computer aiding to find the mechanism solution of function unit, the author apply object-oriented method to automatic descriptions of function unit and combination mode of the sub-function units by form and direction of motion, rate of motion, performing parts, a sub-function structure and a set of relevant “operation”.

2000 唐林,邹慧君,机器产物方案的古代设计方式及生长趋向.机器迷信与手艺,19(2), 192-196, EI收录(EI00045107395)

2000 Tang, Lin. and Zou, H-J. , An overview of the existing methods and development trend of mechanical products design. Mechanical Science and Thenology, 19(2), 192-196, (inChinese)

Abstract According to the main characteristics of the cognitive process of scholars in the project design for mechanical products at present, we put the existing design methods intofour classesnamely, systematic design,structural design,knowledge-based design and intelligent design. We then analyzed the characteristics of each design method and the relationship among these four methods. Finally, we pointed out the development trend of computer-aided project design for mechanical products.

2000 唐林,童昕,主动化观点设计中机构功效的辨认.机器设计,17(12)

2000Tang, Lin and Tong, X.,Identificationof mechanism function in automated conceptual design. Journal of Machine Design, 17(12), 39-41, (in Chinese)

Abstract This paper brings forward a manner that computers discern mechanism function by resolving mechanism function into kinematic function and function quality. The kinematic function describes kinematic characteristics of a mechanism with four attributes, motion form; motion axes, movement direction and rate of movement, and has uniqueness. It is rational basis of computer in automated conceptual design. Function quality reflects performance characteristic and is one of the mechanism attributes. It is described with humanity language and is the basis that human make strategic decision in automated conceptual design. This manner describing mechanism function can be discerned by computer and tallies with the design thought of humankind. So, the difficult problem that mechanism functions can’t be discerned in automated conceptual design has been solved in this paper.

1999唐林,邹慧君,德国机器产物方案设计方式研讨静态.机器设计,16(8):1-4

1999 Tang, Lin. and Zou, H.-J., An overview of design method for mechanical products in Germany. Journal of Machine Design, 16(8), 1-4, (in Chinese)

AbstractThis paper generalizes the design method for mechanical product in Germany into four types, which are systematized design,structuralized design,object-oriented and knowledge-based design,and the design by means of the technology of the software and hardware of computers. We discuss the prospects of application and the developing directions of these four methods in the design of mechanical products.

1999唐林,邹慧君,机器产物活动方案创新设计的CAD方式及完成模子.机器设计与研讨,(4):20-22

1999 Tang, L. and Zou, H.-J.,The Method and Model of Computer aided Creation Design of a Mechanical Product Scheme. Machine Design and Research, (4), 20-22, (in Chinese)

AbstractThe creation design of a mechanical product scheme can come true by changing function structure, inventing new mechanisms and combining mechanisms. This paper builds the creation design model of a mechanical product scheme, brings forward the rules of describing function structure and the systematism methods of searching mechanisms that realize specified function and combining them. In the methods, computer can identify a creation design mode of a mechanical product scheme and design process can be described by program.

1998唐林,面向工具的液压零碎静态特征仿真研讨.机器制造,36(8):11-13

1998 Tang, Lin, Dynamic simulation for the object-oriented hydraulic system. Machinery, 36(8), 11-13,(in Chinese)

AbstractThis paper explained how to use the Object-Oriented method to determine the object of the hydraulic system and to simulate

dynamic performance of the hydraulic system . And it also use hydraulic cylinder as an example to explain how to use VC++ language to descript the classes of the hydraulic system .Finaly, it analyse the advantages of using this method in dynamic analyse of a hydraulic system

1997 唐林,汽车的接纳计谋和绿色设计谋略.汽车手艺,(10):56-58

1997 Tang, Lin, Strategy for environmental friendly design of automotive industry. Automobile Technology, (10), 56-58 (in Chinese)

AbstractThe auto industry is being in rapid developing phase in China. The relationship between auto industry and friendly environment is treated from the reusability and green design

1995 唐林,用剖析法求解空间周转轮系中行星轮转速.华裔大学学报,(02)

1995 唐林,机器设计课程设计改造想象.机器设计讲授研讨(天下讲授集会论文集)机器产业出书社出书

1995 唐林,大学工科理论性讲授关键思索与探究.华裔初等教诲研讨, (27)

1990唐林,车削历程中的振型联系关系颤振稳固性剖析新方式.淮南矿业学院学报,(03),此文1991年获昆明理工大学优异科技论文三等奖

译文(Translation

2008唐林(德译中),M. Kreimeyer, W. Keijzer, U. Lindemann (著),产物开辟历程中的危急治理.工程设计学报,15(5):330-333

2008 Tang, Lin (Translation from German into Chinese)M. Kreimeyer, W. Keijzer, U. Lindemann,Methodisches Handeln bei Krisen in der Producktentwicklung.Journal of Engineering Design. 15(5):330-333,

国际交换与互助(International cooperation

  • 1987—1988国度教委公派在德国Dresden手艺大学做接见学者1年

  • 2009—2010受德国粹术交换中央(DAAD)王宽成教诲基金赞助,在德国Kaiserslautern 产业大学做接见学者1年

EMAILLtang@dhu.edu.cn;Ltang@126.com